L-841R Stick-N-Tear™

Legacy 841 Stick-N-Tear™ is a pressure-sensitive, tear-away embroidery stabilizer that can be used in or without a hoop. It provides body and support during machine embroidery and stitching. It is ideal for fabrics that are sensitive to hoop marks and leaves no residue on your needles! Excellent for projects such as socks, ribbon crafts, cuffs, collars and silk fabrics.

  • White
  • Acid-Free 70% Polyester/30% Cellulose
  • Packaged size: 31cm x 6m
  • Pressure-sensitive tear-away embroidery stabilizer
  • Sewing machine safe

Find this and other quality Legacy products at your local Spotlight Store.

 

Details

General Directions:
[For Machine Embroidery & Monogramming]

1. Hoop the Stick-N-Tear™ with release paper side up.
2. Using a straight pin or craft knife, score the paper and peel away from the stabilizer.
3. Lightly finger press fabric onto the Stick-N-Tear™ over the hoop, keeping the grain line straight.
4. Attach the hoop to the embroidery machine and embroider as desired.
5. Upon completion of embroidery, gently remove the fabric from the Stick-N-Tear™.

Note: Always test Stick-N-Tear™ on a small swatch of fabric before proceeding with the project.

Tips:

— It is best if the fabric is not in contact with the adhesive side of the Stick-N-Tear™ for over one hour.
— Not recommended for use on the right side of fabric, except for momentary tracing when using as a template.
— Stick-N-Tear™ performs best if used between 15-27˚C.

Description

Note: Always test Stick-N-Tear™ on a small swatch of fabric before proceeding with the project.

Tips:

— It is best if the fabric is not in contact with the adhesive side of the Stick-N-Tear™ for over one hour.
— Not recommended for use on the right side of fabric, except for momentary tracing when using as a template.
— Stick-N-Tear™ performs best if used between 15-27˚C.

Pellon logo